DynaVap "The M7" Dry Herb Vapouriser NZ

DynaVap M7 Dry Herb Vapouriser

The DynaVap M7 is a battery-free stainless steel dry herb vaporiser designed for portable, precise sessions without charging or electronics. It features DynaVap’s finless M7 tip, Adjust-a-Bowl chamber control, Pivot airflow and Captive Cap temperature-click system. Available from Puha Express with NZ dispatch.

Best for:
- DynaVap users wanting the latest stainless steel M Series model
- Battery-free dry herb vapouriser sessions
- Microdosing with the 0.05g Adjust-a-Bowl setting
- Full chamber use up to 0.1g
- Pairing with a torch or DynaVap-compatible induction heater
- Customers wanting a compact, modular vaporiser setup

Key Features:
- Finless M7 tip with increased mass for heat retention
- Adjust-a-Bowl chamber control for approximately 0.05g or 0.1g loads
- Pivot airflow control for manual airflow adjustment
- Captive Cap with temperature-indicating click
- Battery-free operation with torch or induction heater
- Durable stainless steel construction
- Compact 92mm design
- Modular DynaVap accessory compatibility

Compatibility:
- Compatible with DynaVap tips, caps, CCD screens and most standard DynaVap modular accessories
- Compatible with torch heating and DynaVap-compatible induction heaters
- Compatible with 10mm or 14mm water pieces when paired with a suitable WPA
- Use DynaVap CCD screens and high-temperature O-rings for maintenance

Complete Your M7 Setup

Preparation:
- Premium Herb Grinder

Torch-Free Heating:
- YLLVAPE IH 2.0
- YLLVAPE IH 3.0

Water Filtration:
- The Bonger WPA
- Patient Glass Collection

Maintenance:
- Decapper
- DynaWax
- DynaKit Maintenance
- Stainless Steel CCD screens
- Titanium CCD screens

Storage:
- SnapStash
- DynaStash

Technical Specifications:
- Brand: DynaVap
- Model: M7
- Product type: Battery-free dry herb vapouriser
- Length: 92mm
- Material: Stainless steel
- Heating: External heat source, torch or compatible induction heater
- Battery: None
- Chamber size: Approximately 0.1g, adjustable to approximately 0.05g
- Airflow: Manual Pivot-style airport
- Cap: Captive Cap
- Screen: DynaVap CCD screen

What’s Included:
- 1× DynaVap M7 complete device
- 1× M7 finless tip, pre-installed
- 1× Captive Cap, pre-installed
- 1× stainless steel condenser, pre-installed
- 1× stainless steel stem, pre-installed
- 1× DynaVap CCD screen, pre-installed
- High-temperature O-rings, pre-installed

How to Use the DynaVap M7:
1. Grind your dry herb to a suitable consistency.
2. Remove the Captive Cap.
3. Load approximately 0.05g–0.1g into the tip chamber.
4. Replace the Cap.
5. Heat the Cap with a torch or compatible induction heater until it clicks.
6. Inhale through the mouthpiece and adjust airflow with the Pivot airport.
7. Wait for the cooldown click before reheating.
8. Use a Decapper or magnet to handle the hot cap safely.

Frequently Asked Questions

Does the DynaVap M7 need batteries?
No. The DynaVap M7 is battery-free and uses an external heat source such as a butane torch or compatible induction heater.

What chamber size does the DynaVap M7 have?
The M7 has an adjustable chamber. It can be used at approximately 0.05g for smaller loads or around 0.1g for a fuller chamber.

Can I use the M7 with an induction heater?
Yes. The M7 can be used with compatible DynaVap induction heaters, including suitable YLLVAPE induction heaters.

What parts should I keep spare?
Useful spare parts include DynaVap CCD screens, high-temperature O-rings, DynaWax and a cleaning brush.

Is the DynaVap M7 portable?
Yes. The M7 is a compact 92mm battery-free device designed for portable dry herb vaporiser use.

Responsible Use:
Puha Express does not sell cannabis, cannabis-derived products, nicotine vaping products or regulated vaping substances. This product is hardware only and is intended for lawful use in accordance with New Zealand law, manufacturer instructions and relevant medical advice where applicable.