Yllvape IH 3.0 Induction Heater
Yllvape IH 3.0 Induction Heater
Couldn't load pickup availability
Yllvape IH 3.0 Induction Heater – Puha Express Edition
Desktop Power. Portable Freedom. Exclusive NZ Green Edition.
The Yllvape IH 3.0 represents a massive leap forward in induction heating technology. This isn't just a portable heater; it's a desktop-class powerhouse in the palm of your hand.
The "Puha Express" Difference
This is the exclusive New Zealand edition, customised with a distinctive Green LED display and firmware tuned for our local preferences.
Designed for the "Heavy Hitters"
Specifically engineered to address the "big cap" market, the IH 3.0 features a larger 18mm coil and a massive 100W power ceiling. While it handles standard DynaVaps beautifully, it is the ultimate engine for heavy thermal extraction devices like the Mad Heaters Tempest, DynaVap HyperDyn, and Armoured Caps.
Key Features
- Adjustable Power (30W - 100W): Complete control over your roast. Use low wattage (30-50W) for slow, terpene-rich flavour sipping, or crank it to 100W for instant, one-hit extractions.
- True Passthrough Charging: Plug it in via USB-C to use the device as a desktop station. The device will charge your batteries to 100% while allowing you to vape, ensuring you are never left without power during a session.
- Dual 21700 Battery System: Powered by two removable 21700 batteries (sold separately) to deliver extended runtime and the high current needed for 100W output.
- Adjustable Timer: Set your safety cutoff or automate your perfect heat cycle (10s - 60s).
- Depth-Adjustable Platform: Fine-tune your extraction by raising or lowering the ceramic insert. Heat the tip for flavour, or the base for density.
- Exclusive Green OLED Display: Sharp, clear, and easy to read. Features a 180° flip function for left or right-handed use.
- 5-Click Activation: Press the middle button 5 times to turn on/off (single press when plugged in via passthrough mode).
Compatibility Guide
| Device | Compatible? | Notes |
|---|---|---|
| DynaVap (Standard) | ✓ Yes | Works perfectly. Adjust the depth screw to centre the tip in the wide coil. |
| DynaVap HyperDyn | ✓ Yes | Perfect Fit. The 18mm coil was specifically sized for the HyperDyn tip. |
| Mad Heaters Tempest | ✓ Yes | Gold Standard. The only portable heater capable of the high-wattage, sustained heating the Tempest needs. |
| Armoured Cap | ✓ Yes | Handles the massive thermal mass of the Armoured Cap with ease. |
| Dani Fusion / Anvil | ✓ Yes** | Works, but requires high power (70W+) and high-discharge batteries. |
Community Cheat Sheet (Starting Points)
Standard DynaVap Cap:
- Power: 35W – 45W
- Technique: Respect the click
- Power: 50W – 60W
- Timer: 30-45s heat time
DynaVap Tips:
- M7 Tip: 35W - 45W (Finless design for consistent roasts)
- M Plus Tip: 45W - 50W (15% larger bowl, one-hit extractions)
- Helix Tip: 30W - 40W (Titanium triple helix, flavour chasing)
- Halo Tip: 40W - 50W (Perforated bowl, high airflow)
Mad Heaters Tempest:
- Flavour: 60W for ~45s
- One-Hit Clear: 80W – 90W for ~30s
HyperDyn:
- Power: 70W – 100W
- Technique: Requires max power to heat the mass before heat-soak
Complete Your Setup
Essential Batteries (REQUIRED):
- Molicel P42A 21700 Battery: 4200mAh, 45A - the recommended battery for IH 3.0
DynaVap Devices:
- DynaVap M 7: Flagship device with finless tip and adjust-a-bowl
- DynaVap B: Entry-level micro-dosing device
DynaVap Caps:
- Armoured Cap: Massive heat retention for one-hit extractions
- Captive Cap: Enhanced airflow and click indication
Accessories:
- Decapper: Safely remove hot caps after induction heating
- Premium Herb Grinder: Perfect grind consistency
Technical Specifications
- Power Output: 30W – 100W (Adjustable)
- Battery: 2× 21700 High-Discharge Li-Ion (Removable, Not Included)
- Recommended Batteries: Molicel P42A or Molicel P45B
- Activation: 5 Clicks On/Off (single press when plugged in)
- Coil Diameter: 18mm (Wide Bore)
- Charging: USB-C (Charges to Full in Passthrough)
- Display: Green OLED with 180° flip orientation
- Timer: Adjustable (10s - 60s)
- Dimensions: Portable Desktop Size (Fits in a bag, not a tight pocket)
- Edition: Puha Express (Exclusive NZ Green Edition)
⚠️ Critical Battery Requirement
This device is a high-performance power tool. You must use high-discharge batteries.
We strongly recommend Molicel P42A or Molicel P45B.
Using standard low-amp batteries (like those for flashlights) will cause the device to throttle, display "Check Battery" errors, or fail to fire at high wattages.
What's in the Box?
- 1× Yllvape IH 3.0 Device (Puha Express Edition)
- 1× USB-C Charging Cable
- 2× Glass Insulator Tubes
- 2× Ceramic Depth Inserts
Note: Batteries sold separately. Molicel P42A 21700 batteries required.
IH 3.0 vs IH 2.0
Choosing between the two?
- IH 2.0: Pocket-sized, 18650 batteries, max 60W, 11.5mm coil - perfect for standard DynaVaps on the go
- IH 3.0: Portable desktop, 21700 batteries, max 100W, 18mm coil, passthrough mode, Green LED - engineered for "big cap" devices and power users
Desktop Performance, Portable Freedom
The Yllvape IH 3.0 Induction Heater – Puha Express Edition delivers unprecedented power and control for thermal extraction device users in New Zealand. With its exclusive Green LED display, 100W adjustable power, true passthrough charging, and compatibility with both standard and large-format devices, the IH 3.0 is the ultimate torch-free heating solution.
Yllvape IH 3.0 Induction Heater - Puha Express Edition. 30-100W adjustable, 10-60s timer, passthrough charging, dual 21700 battery, 18mm coil, Green OLED, 5-click activation. Compatible with DynaVap, HyperDyn, Tempest, Armoured Cap. Exclusive NZ Green Edition. Batteries sold separately.
